Friday, April 7, 2017

As Expected: FAIL!

  Wow, I feel like I'm doing two "fail" posts in a row... Only, this one really is a fail, and that last one was just for tips. 😀 I shared a sneak peek at this project a few weeks ago, but I think I was complaining more about the weather than sharing the project. (The weather finally warmed up to 90°F before turning chilly again yesterday. Thanks, Florida.) I got my chance to "fmelt" my plarn project. I didn't expect it to go perfectly. I didn't think it would fail this badly, either.

crochet, fails, plarn, plastic yarn, recycle, fmelting, hardened plarn, WIP, work in progress


  To explain if you missed it: The plan was to make paper plate holders. And ugh, this is SO much work! First, you make the material (cutting up plastic bags). Then, you crochet the project. And finally, you get out the iron and turn it into hardened plastic. That's why I figured I'd use my not-a-mistake design to test the material instead of frogging it and making more work for myself. I thought if this didn't come out well, I could always flatten it out and use it as a trivet. But, no. All I got was a big, fat FAIL.

crochet, fails, plarn, plastic yarn, recycle, fmelting, hardened plarn, WIP, work in progress

  Melting through the plastic is something I usually do right at the beginning, when the iron is set too high. This time, I took my time before I destroyed my work. 😉 With an old wooden plate holder for a form and parchment paper to keep melted plastic off my iron, I got to work "fmelting". One minute... Two minutes... Five minutes... The plastic still wasn't hardening. I set the temperature up. To make a long story shorter, I ended up cranking the heat all the way up after 20 minutes and still-floppy plastic. What refused to harden up before suddenly melted through.

crochet, fails, plarn, plastic yarn, recycle, fmelting, hardened plarn, WIP, work in progress

  But wait! It gets even better... (That's sarcasm there.) Even though part of the project melted through, other parts of it still wouldn't harden up! Especially around the most important part: The curve that's needed for the shape of a plate holder. The middle of the flat circle did fmelt pretty well. When it came to creating the shape I thought I could make just by melting... Nope, it's not gonna happen this time.

crochet, fails, plarn, plastic yarn, recycle, fmelting, hardened plarn, WIP, work in progress

  The flat sides of that pentagon-turned-circle started showing badly the more I tried to melt and shape. Parts overlapped the form, and others shrank back from the edge. I saw it happening before that melt-through occurred, and that's why I wasn't worried about ruining it with the high heat. I just wanted to test out the temperature I would need for the following projects.

  It might be a big fail, but it was a learning experience. See - I have this all figured out already. 😀 I've fmelted plarn thicker than this before. Why won't this harden up? There's nothing wrong with my iron, is there? (Yes, I burned my finger when I checked the iron for a malfunction. I'll never learn.) And why can't I get it to hold it's shape?

  It's either because of the form or the paper. For other fmelted projects, I've used something metal or covered the form in aluminum foil. I jumped into this project with a bare-bones form that might be letting the heat escape. I've also changed part of the method by using parchment paper. I used waxed paper before, but it leaves residue on my iron.

  So now the question is: Do I really want to continue with this project? It needs a lot of changes before it will be successful. What did fmelt proves this material is way too thin for its purpose. Although hardened, it isn't very strong. The material will have to be thicker and the shape has to change. Plus, the curved shape will have to be made through crochet and not by melting. And if parchment paper is part of the problem, then I'll have to use that waxed paper and be forced to scrub the gunk off my iron again.

crochet, fails, plarn, plastic yarn, recycle, fmelting, hardened plarn, WIP, work in progress

  Now that I've figured out the problem(s), I just have to try again... I'm just not so sure I want to. This is a time-consuming process, and paper plate holders can be bought in sets of eight for $2. I made some extra material ahead of time, but now I know I can't use it for this. Perhaps my time could be better spent turning that material into something a little more successful and practical? Let's not forget the work of cleaning the iron... Okay, all thoughts of future attempts have now been abandoned.

Happy Crocheting!

6 comments:

  1. I love your sarcasm ;-)
    Sometimes you just have to try things out and failing is actually learning.
    I read once a text about creativity and it said that 90% is 'learning and failing, getting nowhere' and 10% is creating spectacular things.
    Now, that sounds a little negative to me, but still... just wanted to say: don't give up!
    Have a great weekend, Sigrid

    ReplyDelete
    Replies
    1. Thanks, Sigrid! I've learned that I might not want to continue with this idea... Perhaps sometime in the future I'll forget how much work this is and try again. :)
      Hope you enjoy your weekend, too!
      PS: It's not that bad - I think we can get 15% of our creativity to result in spectacular things. ;)

      Delete
  2. Try covering the iron with foil first, then use your wax paper as usual. I am sorry I don't know what this would to the heat settings, but it would be easier than cleaning the face plate over and over. I truly enjoy your post, and I look forward to the information you give. Thank You Amanda

    ReplyDelete
    Replies
    1. That's an awesome idea, Amanda -Thank you! I will have to try it out. Scrubbing that gunk off takes more elbow grease than I have. :)

      Delete
  3. Oh dear! As long as you've not ruined your iron - that would be really bad! Not only would you have failed in you attempt making a basket but you would have to get a new iron too! I hate it when ideas won't turn out the way I imagined them to. It's all right when the result is still of some use (or even better) but when it's a complete failure...
    Don't fret about it though,
    Marjan

    ReplyDelete
    Replies
    1. Absolutely no fretting here, Marjan! It was only a novel idea I wanted to try, and I won't let this fail get to me. I'll turn it around - Maybe that extra material will go to making another reusable bag... No ironing needed for that! ;)

      Delete

Comment moderation is now enabled because of those nasty spammers - Sorry!
Your comment will go through after you click "publish", but it won't be visible until approved.